APlusLift MT1500 Manual de instalación e instrucciones de uso - Página 13
Navegue en línea o descargue pdf Manual de instalación e instrucciones de uso para Sistemas de elevación APlusLift MT1500. APlusLift MT1500 20 páginas. Motorcycle lift
Imprimir página
APlusLift MT1500 & MT1500X
I nst a lla t ion
4 .
I N ST ALLAT I ON M a nua l
4.5 VISE INSTALLATION AND EYE BOLTS
The front wheel clamp mounts directly onto the front of either the table assembly or the
front extension, depending on which configuration you prefer to set your lift up in (There are 2
positions on the front extension for mounting - allowing 3 separate configurations.) Simply bolt
the movable clamp onto the left side of the lift as you look at it from the rear using the provided
bolts. Next, mount the stationary clamp onto the right side of the lift.
The APlusLift MT1500 & MT1500X both come with an adjustable front wheel stop. To
install this piece, simply use the pin provider onto the front of the table assembly or front
extension, again depending on which configuration you opt to use for your lift.
BEFORE LIFTINg: Always tie down the equipment on four corners using the tie
down straps and tie down eyelets mounted on the lift table's surface. Do this every time
before operating the lift! See Figure 4.3 for the diagram of where Eyelets can be placed.
Please see the pictures below for proper installation of the wheel vise and information about
tie-down eyelets.
Figure 4.2
Reference for proper wheel vise installation.
Figure 4.3
4 tie-down eyelets provided with this lift can be
placed in several locations and must be used to
secure loads before any attempt is made to lift them.
www.apluslift.com
13 of 20
TM
Phone: 800-616-9618 Text: 425-300-2600 Email: [email protected]
Copyright
2020
C