Addonics Technologies RAID Tower IX RT93SDEU3 Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Sistema de matriz de discos Addonics Technologies RAID Tower IX RT93SDEU3. Addonics Technologies RAID Tower IX RT93SDEU3 5 páginas.

Imprimir página
Notes on Spare Drives using the Easy RAID Setting (EZ)
When EZ function is ENABLED, the auto-rebuilding to spare drive is automatic.
The degraded RAID group will start rebuilding automatically by using the existing
spare drive.
* Spare drive can be either plugged after RAID building or a new drive can be plug
as the spare drive when RAID rebuild is required.
When will rebuild action start?
•
When the raid fails and EZ is enabled, the HPM-XU will
automatically rebuild the RAID group using the spare.
•
When the raid fails and EZ is disabled, the HPM-XU will NOT
rebuild the raid group unless you install a good drive to replace the
failed drive.
Connecting the Power Cable and RAID Tower to the
Computer
a.
Connect the power cord provided from the wall
outlet to the back of the tower.
b.
Make sure the power is off (power LED light
should be off).
c.
Connect each of the Port Multipliers to the
computer using either a USB 3.0 or eSATA
cable.

Power on/off control

a.
A main power switch is located at the back of
the tower. Turn the switch on. Another auxiliary
switch is located on the front of the tower.
b.
Make sure the power is off on the auxiliary
switch (power LED light should be off).
c.
Power on the tower.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Screws
Bottom Front
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Power
Connector
Power
Switch
Power
Switch
HDD LEDs