4D systems gen4-uLCD-24PT Manual de introducción - Página 4

Navegue en línea o descargue pdf Manual de introducción para Monitor 4D systems gen4-uLCD-24PT. 4D systems gen4-uLCD-24PT 20 páginas. Intelligent display modules

Imprimir página

1. Getting Started with a Simple Project

SYSTEM REQUIREMENTS

The following subsections discuss the hardware and software requirements

for this manual.

Hardware

1.1 Intelligent Display Module and Accessories

The gen4-uLCD-XXPT intelligent display module and its accessories

(interface board and flat flex cable) should be included in the box

delivered to you after your purchase from our website or through one of

our distributors. Please refer to the section "What's in the Box" for images

of the display module and its accessories.

1.2 Programming Module

The programming module is a separate device required to connect the

display module to a Windows PC. 4D Systems offers the following

programming modules:

• 4D Programming Cable

• uUSB-PA5-II Programming Adaptor

• 4D-UPA

To use any of the programming modules, the corresponding driver must

first be installed in the PC. You may refer to the product page of the given

module for more information and detailed instruction.

Note: These devices are available separately from 4D Systems. Please refer to the

product pages for more information.

1.3 microSD Card

Workshop4 has built-in widgets that can be used to design your display

UI. In order to use these widgets, they should be saved first into the

microSD Card along with the other graphic files during the compilation

step.

Note: microSD Card is optional and is only needed with projects that are utilizing

graphical files. Please note as well that not all cards on the market are SPI

compatible, and therefore not all cards can be used in 4D Systems products. Buy

with confidence, choose the cards recommended by 4D Systems.

gen4-uLCD-XXPT - GETTING STARTED MANUAL