4D systems GEN4-4DCAPE-43CT-CLB Manual de introducción - Página 3
Navegue en línea o descargue pdf Manual de introducción para Unidad de control 4D systems GEN4-4DCAPE-43CT-CLB. 4D systems GEN4-4DCAPE-43CT-CLB 14 páginas. Lcd cape for beaglbone black
Imprimir páginaINTRODUCTION
This Getting Started Manual is an introduction to becoming familiar with
the gen4-4DCAPE-XXT/CT-CLB. This manual should be treated only as a
useful starting point and not as a comprehensive reference document.
In this Getting Started Manual, we will briefly focus on the following topics:
• Hardware Requirements
• Image Flashing
• Getting Started with Simple Projects
• Reference Documents
The gen4-4DCAPE-XXT and gen4-4DCAPE-XXCT-CLB are part of the gen4
series of display capes designed and manufactured by 4D Systems for
BeagleBone boards. These capes feature a 4.3", 5.0" and 7.0" colour LCD
display powered through a BeagleBone board and come in resistive and
capacitive touch variants—gen4-4DCAPE-XXT and gen4-4DCAPE-XXCT-
CLB, respectively.
SYSTEM REQUIREMENTS
The following subsections discuss the hardware and software requirements
for this manual.
1
Hardware
1.1 Beaglebone Black Board
One of the most important requirements is the BeagleBone Board that
will control the Cape. It should be loaded with a system image with
desktop for the Cape to start functioning.
1.2 gen4-4DCAPE-XXT/CT-CLB
The gen4-4DCAPE-XXT/CT-CLB and its accessories should be included
in the box delivered to you after your purchase from our website or
through one of our distributors. Please refer to the section "What's in the
box" for images of the display module and its accessories.
gen4-4DCAPE-XXT/CT-CLB - GETTING STARTED MANUAL
|
3