Apogee Skill Level 4 Manual - Página 8

Navegue en línea o descargue pdf Manual para Juguete Apogee Skill Level 4. Apogee Skill Level 4 16 páginas.

Apogee Skill Level 4 Manual
… 30. Apply thin CyA adhesive to the upper edges of
the cardstock details. Allow the CyA adhesive to
harden. Then gently sand down the surface of the
details using a fine grit sandpaper to smooth all
the edges.
Canards:
… 31. Using a sharp hobby knife, cut out the four
canards (part "C") and four of the pivot plates (part
"D") from the cardstock detail sheet (one extra piv-
ot plate is provided on the sheet). Sand the edges
as required to remove the remnants of the tabs.
… 32. Apply wood glue to the bottom and tab of the
canard (part "C"). Insert the "C" piece tab into the
"D" part. Due to the small size of the pieces, it can
be easier to apply the glue using a toothpick rather
than directly from the bottle. Carefully adjust the
two parts of each assembly so that they join at a
right angle and allow the canard assemblies to dry.
Repeat for the remaining three canard fins.
… 33. Apply thin CyA to each of the exposed edges
of the canards and allow the adhesive to harden.
Once the adhesive has set up, smooth the edges
of the parts with fine sandpaper.
Scale Rail Guides:
… 34. Using a sharp hobby knife, cut out two of the
"G" parts (three are provided) and one "H" part
(two are provided) from the 3/32" balsa sheet.
Page 8
Step 30
Step 31
Step 32
Step 33
Step 34