Dasan DA-581BT Manual del usuario - Página 4

Navegue en línea o descargue pdf Manual del usuario para Auriculares Dasan DA-581BT. Dasan DA-581BT 7 páginas.

General procedure

Turn on Bluetooth on your phone

Put the headset in pairing mode (make sure the headset is switched off, press

and hold the answer button for 4-5 seconds until the LED flashes red and green)

Perform a search for Bluetooth devices on your phone.

Connect to >>device logo<< when found. The PIN code is 0000 (four zeros)

Different phones have different ways to handle Bluetooth devices. Read the users

manual of your phone for more info. Some phone for more info. Some phones will

connect to the headset automatically when it is within range, for example when you

return to your office. For other phones, it may be necessary to reconnect manually

when the connection has been broken.

The pairing mode is active for 3 minutes. After that, the headset will enter standby

mode.

Using the headset

Answer a call

Press the answer button briefly.

Make a call

Dial the number on the mobile phone and press the answer button briefly.

End a call

Press the answer button briefly, or end the call on the mobile phone.

- 8 -

Volume adjustment

Headset ring alert adjustment

The type of ring alert signal in the headset will vary depending on your telephone

model. Some phones will transfer your ordinary ring melody to the headset. In these

cases, the volume and ring melody adjustments are made in the phone.

With other telephone models, there is an internal ringer alert in the headset when you

receive an incoming call. This ringer alert tone can be set to two different modes.

For using this function, disconnect Bluetooth device with the phone.

Press and hold Volume Up and Down simultaneously for 1 second. A beep tone

is heard in the speaker.

To resume the default setting, press Volume Up and Volume down

Press volume up/volume down to adjust the

listening volume. There is a small notch on

each volume button that makes them easy to

find. The headset listening volume can also

be adjusted on the phone.

Note that high listening volume settings may

cause echo or other noise on the line, for one

or both parties on the line. Try to lower the

listening volume if this is the case.

Important! – High listening volume settings

may be harmful to your hearing.

- 9 -