Apogee Instruments MQ-650 Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida Apogee Instruments MQ-650. Apogee Instruments MQ-650 20 páginas. Underwater epar meter
Imprimir página
DEPLOYMENT AND INSTALLATION
Apogee MQ series ePAR meters are designed for spot-check measurements, and calculation of daily light integral
(DLI; total number of photons incident on a planar surface over the course of a day) through the built-in logging
feature. To accurately measure PFD incident on a horizontal surface, the sensor must be level. The AL-100
accessory leveling plate is recommended for use with the MQ-650 to ensure the sensor is level when attached to a
cross-arm. The bubble-level in the plate makes leveling simple and accurate.
The AM-310 Sensor Wand accessory incorporates a mounting fixture at the end of an extendable telescopic wand
(up to 33 inches/84 cm). The wand is not suited for wet environments; however, it is excellent for greenhouses and
growth chambers. Its ability to retract to a smaller size also makes it ideal for travel use.
The AM-320 Saltwater Submersible Sensor Wand accessory incorporates a mounting fixture at the end of a 40 inch
segmented fiberglass wand and is well-suited for saltwater use. The wand allows the user to place the sensor in
hard to reach areas such as aquariums.
MQ-650 sensor attached to an AL-100
leveling plate.
AM-310 Extendable Sensor
Wand
AM-320 Saltwater Submersible
Sensor Wand