Dascom TALLY MIP480 Manual de inicio rápido

Navegue en línea o descargue pdf Manual de inicio rápido para Impresora Dascom TALLY MIP480. Dascom TALLY MIP480 2 páginas.

Imprimir página

Quick Start Guide

Safety Guidelines

For detailed information, refer to the User Guide of the printer. The User Guide is provided as an Adobe Acrobat PDF file on the CD shipped

with your printer. Be sure to read the safety guidelines in the User Guide before using this product. Keep this User Guide in a place which is

easily accessible at all times.

WARNING

! Do not use the printer while driving.

! To avoid any possibility of injury, before cleaning the printer,

turn off the power to both the printer and the computer,

and unplug the printer.

! Do not use solvents, kerosene, or abrasive cleaning materials

that may damage the printer.

! Keep all liquids away from the printer.

Detailed picture

Control Panel - Printer Controls and Buttons

Paper handling

The printer can handle paper with different thicknesses. The Print Gap Lever allows you to adjust for different paper thickness. Be sure to

adjust the Print Gap Lever whenever you change the number of copies to be printed. If desired, raise the paper support fully up, position

#4-2, for improved visual paper loading. After loading, move the paper support to fully down position #1.

Control Buttons

Indicator Lights

2-1 Loading Continuous Forms

A) Push the Paper

B) Adjust for paper thickness

Select Lever up

with the Print Gap Lever

to choose

Continuous Forms

CAUTION

! Before starting to print, check that the ribbon cartridge is correctly

installed the paper is loaded in the proper position.

! If the printer has worked for some time, avoid touching the printhead:

it can be very hot. It is advisable to wait a few minutes before

attempting to replace the ribbon cartridge.

! Once the printer has been turned off, wait at least 10 seconds before

turning it on again; this allows the internal reset circuitry to work properly.

! Do not self test without ribbon or paper.

! If you try to print crunched, folded or damaged material, this could lead

to paper jam.

Power On:

Press the POWER/SLEEP button

and release.

Larger Print

Gap

Smaller

Print Gap

MIP480

Mobile Printer

1. Vertical Mount

2. Control Panel

3. Paper Tear Edge

4. Paper Edge Guides

5. Single-Sheet Paper Support

6. Paper Stack

7. Interface Connector

8. Ribbon Cartridge

9. Print Gap Lever

10. Print Head

11. Paper Select Lever

Power Off:

Press and hold the READY/CLEAR

button, then press the POWER/SLEEP

button and release to turn-off printer.

C) The Print Gap Lever

Caution: if printing

smears, the ribbon

misfeeds, or the

paper jams, move

the print gap lever

one position higher.

GEK-05024