Duren 521805 Manual de instrucciones - Página 5
Navegue en línea o descargue pdf Manual de instrucciones para Pulverizador de pintura Duren 521805. Duren 521805 9 páginas. Conventional gravity gun
Imprimir páginaFMT3006_Product Instructions 19/09/2014 11:23 Page 5
PLEASE KEEP THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE
areas, use a criss-cross pattern as shown in Fig. 3.
Never start or stop the gun whilst it is aimed at the workpiece. Too fast a pass will give a thin and
patchy coat whilst too slow a pass will result in a heavy coat. Apply one coat at a time and observe
manufacturers drying times before applying the next coat or finishing/polishing.
Do not tip the gun more that 45
Fig. 1
To Spraygun
Fig. 2
Uneven finish created by arcing
Fig. 3
Maintenance
- GUN MUST BE SERVICED BY A COMPETENT PERSON
- ALWAYS DISCONNECT FROM AIR SUPPLY BEFORE CLEANING, DISMANTLING OR
SERVICING.
- NEVER IMMERSE GUN IN SOLVENT.
- Pour remaining paint into another container and then clean paint passages and air cap. Spray a
small amount of thinner to clean paint passages. Insufficient cleaning adverse pattern shape and
particles. Clean promptly two-part paint promptly after use.
- Clean other sections of the gun with the brush soaked in thinner or with a waste cloth.
- Always change to air cap, fluid nozzle and needle as a matched set.
- Lightly lube all moving parts with a non-petroleum based lubricant.
T: 01582 661993 F: 01582 667100 E: [email protected]
T: 01582 661993 F: 01582 667100 E: [email protected]
.
o
Whip Hose
Q
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
Quick Release Coupling
Air Fitting
Main Airline
Air Filter/Regulator
R
100 - 250mm
Keep trigger pressure and passing
speed consistant
From Air Source