APPA APPA-31 Introducción - Página 3

Navegue en línea o descargue pdf Introducción para Transductor APPA APPA-31. APPA APPA-31 4 páginas. Ac current transducer

OPERATION

AC Current Measurement

1. Set the DMM at ACV Function and proper

range.

2. Connect the plug of transducer with DMM

firmly.

3. Press the trigger to open transformer jaws

and clamp one conductor only, making

sure that the jaw is firmly closed around

the conductor and reading the result from

the digital display of DMM.

MAINTENANCE

To keep the instrument clean , wipe the case

with a damp cloth and detergent , do not use

abrasives or solvents.

Any adjustment , maintenance and repair

shall be conducted by a service personnel

Meter Safety

Terms marked on Equipment.

ATTENTION — Refer to Manual.

DOUBLE INSULATION — Protection

DANGER - Risk of electric shock.

Symbols in this Manual

This symbol indicates where cautionary

or other information is found in the manual.

SPECIFICATIONS

Current Range :0.1A to 400A a.c. RMS.

Output Voltage :1mV a.c. per 1Amp a.c.

Working Voltage : 600V CAT. II per IEC

Maximum Altitude : 2000m

Operating Temperature : 0℃ to 45℃<75%

Storage Temperature : -20℃ ~ 60℃

Class II.

1010-1

R.H.