Appareo STRATUS ESG Manual - Página 4
Navegue en línea o descargue pdf Manual para GPS Appareo STRATUS ESG. Appareo STRATUS ESG 9 páginas. Portable receiver connector plate
También para Appareo STRATUS ESG: Manual del piloto (13 páginas), Manual de instalación (5 páginas)
Imprimir página
If you're using a serial encoder, it must be able to provide
Trimble/Garmin 9600 baud format in 100' or 10' resolution. (Trim/Gar =
100' & Trim/Gar -25 = 10').
If you're using a parallel encoder, it must be a Shadin/RMS or
Shadin/RMS -25 which is 9600 baud rate.
Shadin F/ADC (Format Z) and Shadin (Format C) will not work.
ADS-B Receivers
Q: Does my customer need the Stratus portable connection
kit?
They may continue to use their Stratus portable receiver independently, but
purchasing the connection kit will allow them to take the Stratus portable
receiver off the glare shield or window and stow it out of the way. The
portable receiver will use the aircraft's mounted antennas for excellent GPS
and ADS-B reception, and will be supplied power from Stratus ES or Stratus
ESG.
Q: How do I configure Stratus 2 or Stratus 2S to automatically
power on when Stratus ES or Stratus ESG is powered on?
1. Open ForeFlight Mobile.
2. Tap More in the bottom right corner.
3. Tap Devices.
4. Tap your device.
5. Scroll down to Settings. Enable Turn On When Plugged In.
Troubleshooting
Q: Why is my customer's Stratus receiver reporting poor GPS
accuracy when connected to Stratus ESG?
A firmware update may be required for the Stratus receiver to ensure data is
reported properly. If their Stratus firmware version is older than what is listed
below, please have them perform an update using the instructions found here.