Durite 0-441-72 Manual

Navegue en línea o descargue pdf Manual para Equipos de iluminación Durite 0-441-72. Durite 0-441-72 4 páginas. Led high intensity warning light

Before using this unit please read these instructions carefully. Take special care to follow

the warnings and safety suggestions listed below. Keep these instructions for future refer-

ence.

1. Proper installation of this product requires the installer to have a good understanding of

automotive electronics, systems and procedures.

2. If mounting this product requires drilling holes, the installer MUST be sure that no vehi-

cle components or other vital parts could be damaged by the drilling process. Check both

sides of the mounting surface before drilling begins. Also de-burr the holes and remove any

metal shards or remnants.

3. Do not install this product or route any wires in the deployment area of your air bag.

Equipment mounted or located in the air bag deployment area will damage or reduce the

effectiveness of the air bag, or become a projectile that could cause serious personal injury

or death. Refer to your vehicle owner's manual for the air bag deployment area. The

User/Installer assumes full responsibility to determine proper mounting location, based on

providing ultimate safety to all passengers inside the vehicle.

4. Do not attempt to activate or control this device in a hazardous driving situation.

5. This product contains high-intensity LEDs. Do not stare directly into these lights.

Momentary blindness and/or eye damage could result.

6. Use only soap and water to clean the outer lens. Use of other chemicals could result in

premature lens cracking (crazing) and discoloration. Lenses in this condition have signifi-

cantly reduced effectiveness. Inspect and operate this product regularly to confirm its prop-

er operation and mounting condition. Do not use a pressure washer to clean this product.

LED High Intensity Warning Light

Part 0-441-72

WARNINGS

SAFETY WARNING

www.durite.co.uk

0-441-72-LEAF