Data Domain DD690g Manual de instalación y configuración - Página 4

Navegue en línea o descargue pdf Manual de instalación y configuración para Pasarela Data Domain DD690g. Data Domain DD690g 6 páginas. Gateway system

Imprimir página

Define the Data Domain System Information for Your Site

SYSTEM SETuP WOrkSHEET

An installation requires information unique to your site. Before starting the

installation, provide values for the system information listed below.

1. A fully qualified host name for the system:

2. The DNS domain name:

3. Use Table 1 (below) to enter Ethernet connectivity information.

4. A routing gateway IP address (if no DHCP):

5. DNS server IP addresses (if no DHCP) (fill in below):

Primary

Secondary

6. Select the CIFS authentication method:

Workgroup

Workgroup name:

WINS servers:

Backup user

name:

Password:

TAblE 1:

Ethernet Connectivity

Enable (circle one)

Use DHCP (circle one)

IP address (if no DHCP)

Netmask (if no DHCP)

Perform Initial System configuration

NOTE:

The system might not be usable for up to three hours if the NVRAM

batteries are discharged. Refer to the NVRAM Battery Charging Instructions for

more information.

Log into the system with the user name of sysadmin. The password is the

system's serial number. A Configuration Wizard is provided. There are six

sections to the configuration: Licenses, Network, File System, System, CIFS,

and NFS.

You can configure the system via either the Data Domain Enterprise Manager

(recommended) or the command-line interface (CLI). The Enterprise Manager

is a Web-based, graphical-user interface (GUI) application.

Note:

The Data Domain system must have an IP address to use the Enterprise

Manager. The system must be able to communicate with the internet.

To use the Enterprise Manager, open a web browser and enter the path to

the Data Domain system; for example, enter http://dd01/ where dd01

is the system name. Select your system in the Navigational panel, then select

Maintenance > System. From the Tasks menu, select Launch Configuration

Wizard.

Select one of the configuration sections and follow the instructions on the

screen.

Complete each of the six sections.

Tertiary

Active Directory

Realm name:

WINS servers:

Domain admin

name:

Password:

eth0

eth1

Yes / No

7. Backup servers (or * for all):

8. Administrator's password:

9. Host name from which to administer the system:

10. Administrator's email address (or admin group alias):

11. (Optional) Description of the system's physical location:

12. Mail server (SMTP) host name:

13. Time zone name (default is US/Pacific):

eth2

eth3

Yes / No

uSING THE clI cONFIGurATION WIZArD

At the first login, the configuration utility starts. The list entries in the utility

can be comma-separated, space-separated, or both.

4 At each prompt, enter a value, OR

4 Enter a question mark (?) for more details, OR

4 Press Enter to accept the value displayed in braces.

The Configuration Wizard guides you through the configuration steps, one

section at a time. Follow the Configuration Wizard instructions for entering

appropriate values.

At the end of each configuration section, you can choose to:

4 Save – Save the displayed configuration.

4 Cancel – Delete all new values and go to the next section.

4 Retry – Restart the input entry at the beginning of the current section.

The value entered previously appears as the default value at each prompt.

cONFIGurE THE luNS

4 Use the disk show hardware command to find out the size of

each LUN.

4 Use the disk show raid-info command to check which LUNs are

available.

4 Use disk add <dev#> to put a LUN into use by the gateway system

The state of the dev# must be unknown in order for it to be added.

For reference, please see DD OS Product Documentation for your platform. For

DD OS 4.7, see the Initial Configuration Guide. For earlier DD OS versions, see

the User Guide at https://my.datadomain.com/US/en/documentation.jsp.

eth4

eth5

Yes / No