Durite 0-099-16 Manual

Navegue en línea o descargue pdf Manual para Cámara digital Durite 0-099-16. Durite 0-099-16 2 páginas.

Brake Light Camera for Durite CCTV 12

volt Part 0-099-16

Fits: Ford Custom 2018-2020

WARNINGS

Before using this unit please read these instructions carefully. Take special care to follow

the warn-ings and safety suggestions listed below. Keep these instructions for future refer-

ence.

There are no user-serviceable parts within the unit, refer servicing to qualiﬁed service

personnel.

PRECAUTIONS

• Please ensure you are familiar and comply with local trafﬁc and driving regulations.

• Connection - The camera should only be connected to a Durite cctv system.

• Heat - Do not install the camera near heat sources.

• Mounting - Ensure the camera is facing the desired direction before ﬁxing the camera

base. If ﬁxing to isolated return chassis the camera bracket should be isolated from the

vehicle chassis.

• Service - The user should not attempt to service these units beyond that described in these

instruc-tions. All other servicing should be referred to an authorised service technician.

GENERAL

The camera has a CCD image sensor which gives a high quality picture and its solid state

circuitry provides extremely long life. Compact size and single connection make it easy to

install. Automatic gain control (AGC) provides a clear image in both strong sunlight and

low light conditions, if lighting conditions fall below a set level the Infra-red LEDs will

illumi-nate. It is recommended that all camera lead connections are additionally sealed by

either wrapping with a suitable tape or application of heat shrink sleeving. It is recommend

to connect the system and test before ﬁxing to ensure the correct ﬁeld of view is displayed.

IMAGE VIEWING NORMAL vs. MIRROR

The default image is set to MIRROR Image Mode for reversing.

To change to NORMAL Image please refer to guidelines in your CCTV

Manual in the 'Monitor Control' section.

0-099-16-LEAF