Data Link CW422 Manual - Página 6

Navegue en línea o descargue pdf Manual para Instrumentos de medida Data Link CW422. Data Link CW422 12 páginas. Compact watch rs232c/rs422 analyzer

Connection Example

Please connect it according to the following procedures.

1) CW232/422 is connected between two equipment that monitor it as shown in the figure below.

2) To display the monitor data, CW232/422 is connected between WindowsPC with the USB cable.

3) On WindowsPC, the CW232/422 application program is started.

4) It is confirmed to recognize CW232/422 by the CW232/422 application program's normally

starting.

5) It is assumed the state that can be communicated by turning on the power supply of the device at

monitored both ends.

6) The CW232/422 application program is set, and it is assumed the state of the monitor beginning.

7) The communication that wants to be actually monitored between devices at both ends begins.

Attention:

※ Please connect both sides in correct way.

※ Please note the signal polarity of sufficiently when you connect CW422 main body to the

communication line.

※ There is a possibility that it causes the breakdown like the damage of the equipment etc. when the

polarity of is connected by mistake.