DURKOPP ADLER 0867 590114 Manual de instrucciones - Página 15
Navegue en línea o descargue pdf Manual de instrucciones para Accesorios para máquinas de coser DURKOPP ADLER 0867 590114. DURKOPP ADLER 0867 590114 16 páginas. Fitting remaining thread monitor for var. kits
Imprimir página
Anbauanleitung des Restfadenwächters
Instructions for fitting remaining thread monitor
5
Setting parameters for the remaining thread monitor
Sewing drive:
DC1600 - DA82GA
DC1550 - DA321G
Recommended mode for the remaining thread monitor fonction :
Parameter F-195 on Function "3"
Possible setting parameters for the remaining thread monitor:
Parameter
Value
F-195
0
F-195
1
F-195
2
F-195
3
F-195
4
F-195
1-3
085
0 - 9990
F-195
4
085
0 - 9990
086
0 - 9990
087
0 - 9990
If a detailed functional specifications of the remaining thread monitor functions and
stitch counting is needed, please check the corresponding operating instructions of the control
unit DA82GA or DA321G.
Definition:
- Sewing foot down, after the thread trmimming
Pedal in rest position and pull the pedal back: the sewing foot is lifted.
- Sewing foot up, after the thread trmimming oben
The sewing foot is lifted automatically, pull the pedal back after the thread trimming.
Ausgabe/Edition:
10.2006
für div. Bausätze (siehe Pkt 1.1)
for var. kits (see section 1.1)
Function
Remaining thread monitor OFF
No Stop after the first detection bobbin empty,
sewing foot down, after the thread trmimming.
Stop after the first detection bobbin empty,
sewing foot up, after the thread trmimming.
Stop after the first detection bobbin empty,
sewing foot down, after the thread trmimming.
Bobbin thread monitoring through number of stitches preset.
Light barrier remaining thread monitor control without function.
Number of stitches for remaining thread.
Count from the first detection "Bobbin empty" until Stop.
Number of stitches A for bobbin thread monitoring
Number of stitches B for bobbin thread monitoring
Number of stitches C for bobbin thread monitoring
Preset number of stitches will be counted downwards until "0".
Once the value "0" is reached:
Stop when the value "0" is reached and the sewing foot will be down,
after the thread trmimming.
Printed in Federal Republic of Germany
Teile-Nr./ Part-No.:
0791 867702
Blatt:
von
Sheet: 15
from 16