DURKOPP ADLER H-TYPE ECO Instrucciones adicionales - Página 10
Navegue en línea o descargue pdf Instrucciones adicionales para Accesorios para máquinas de coser DURKOPP ADLER H-TYPE ECO. DURKOPP ADLER H-TYPE ECO 18 páginas. Instructions for replacing the winder
Imprimir página
3
Fig. 8: Assembling the new tensioning plate
(1) - Holder
To assemble the new tensioning plate:
1. Unscrew the holder (1) from the carrier (2) of the control.
2. Insert the holder (1) from below into the hole (3) in the machine arm.
8
Assembling the new tensioning plate
WARNING
The tensioning plate may only be assembled by
qualified specialists.
Switch off the machine and disconnect the power
plug before assembling the tensioning plate.
Make sure the power plug cannot be
unintentionally reinserted.
NOTICE
Property damage may occur!
The cables and hoses may become damaged by kinking, crushing
or chafing.
Lay cables and hoses in such a way that they will NOT be kinked,
pinched or chafed.
①
Assembling the new tensioning plate
②
(2) - Carrier
Additional Instructions H-TYPE - 00.0 - 09/2017