Data-Tronix DT-QAM-AMM-1 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Media Converter Data-Tronix DT-QAM-AMM-1. Data-Tronix DT-QAM-AMM-1 12 páginas.

6. Encode Feature: Changes the encoder feature settings.

5.1 1080P to I: 1080p video input to 1080i video output.

5.2 Interlace Enc: Changes the video encoder method. For 1080i and progressive

video input, "I Field" is suggested. For 480i/576i video input, please use I Frame Mode.

7. Audio Codec: It can change the audio codec between MP1 Layer II, AAC-LC and AC3.

8. PMT PID: Changes the PMT (Program Map Table) PID. Allowed value is 0001~8191.

9. Video PID: Changes the Video PID. Allowed value is 0001 - 8191.

10. Audio PID: Changes the Audio PID. Allowed value is 0001 - 8191.

11. PSIP TSID: PSIP TSID edit.

12. Channel Mode: Changes the channel between DTV channel (two-part channel number)

and Loop channel (one-part channel number).

13. Major No.: Major no. edit.

14. Minor No.: Minor no. edit.

15. Short Name: Short name edit.

16. Long Name: Long name edit.

17. Source ID: Source ID edit.

18. Setup Date & Time & Weekday: Changes the date, time and weekday of the DT-QAM-

AMM-1. Time will be shown on the display. Note: this setting is not saved to non-volatile

memory. If the instrument loses power, the user has to correct it manually.

19. FW Version: Shows the firmware version installed in the DT-QAM-AMM-1. This option is not

editable.

20. Reboot Device: Select "Reboot " to reboot the DT-QAM-AMM-1. Select "Reboot to DEF" to

return the DT-QAM-AMM-1 to default values.

21. Device Related:

19.1

Device name: Changes the device name. Allows 1~7 characters including letters,

underline, space and dash.

Time out (sec.): Changes the display timeout setting. Display becomes

19.2

brighter when the front panel is pressed. If no more keys are pressed after this

duration, the display becomes darker. Allowed value is 10 ~ 180 seconds.

22. Upgrade: Downloading firmware from a USB device. FAT32 formatted USB storage is

recommended.

23. Auto RF Tune: Factory use only. DO NOT CHANGE!

24. Save Changes: Saves the current configuration on the non-volatile memory of

the DT-QAM-AMM-1.

DT-QAM-AMM-1 Manual