DataBay AVE-308T Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Extensor DataBay AVE-308T. DataBay AVE-308T 11 páginas. Vga and audio cat-x av extender
También para DataBay AVE-308T: Manual del usuario (15 páginas), Manual del usuario (16 páginas)

User Manual
() Local Function Test: Power on your AV device, the "ACTIVE" LEDs of
Transmitter will turn on orange to indicate the video activation, and you
should ready to do AV broadcasting.
VGA/Audio
Installation Diagram of System Transmitter
(4) Receiver Installation: Please follow previous section for AVE-01R to
install the system Receiver, and the maximum extended length of this
section should not exceed 00 meters.
(5) Transceiver Installation: If you wish to have more AV displays, you can
use system Transceiver, you may use 4/8-Port Transceiver model to
expand one AV signal to 4/8 AV signals. In the other way, you may stack
more system Transmitter through their local AV port to generate more
AV RJ-45 outputs locally and the maximum local stacking capacity is
limited to 4 layers to ensure good broadcasting quality. Please follow
next two section for instruction.
14
4/8/16-Port Transmitter
VGA/Audio
Projector
Use Cat5e cable
Max : 00M
4/8/16-Port Transmitter
4/8-Port Transceiver
Installation Diagram of System Receiver and Trans
(6) System Expansion through UTP: This series can stack into maximum
three layers of UTP section to reach more AV outputs and depends on
the display devices, you may reach a lower VGA solution than single
layer. The suggested range of VGA broadcasting is 800x600@900m,
180x104@600m, and 048x156@00m. Please be noted that you
must use Transceiver for intermediate expansion.
VGA/Audio
Projector
Cat5e cable-Layer 1
Transmitter
Transceiver
Transceiver
Stack Three Layers of AV Extender through Cat5e to Reach more Displays
PDP
LCD
CRT
VGA output Devices
One-Port Receiver
4/8 RJ45
AV Outputs
Receivers
4~8 Set Cat5e
PDP
LCD
CRT
VGA output Devices
One-Port Receiver
Cat5e cable-Layer
Cat5e cable-Layer
15