DataBay AVE-308T Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Extensor DataBay AVE-308T. DataBay AVE-308T 16 páginas. Vga and audio cat-x av extender
También para DataBay AVE-308T: Manual del usuario (11 páginas), Manual del usuario (15 páginas)
Imprimir página(3) Function Test: Turn on your AV device, the POWER LED should turn on
green to indicate the Power On status and the LEDs above RJ-45 will blink
before VGA signal is turned On and remain On after VGA signal is turned On.
5.2 Receiver AVE-301R installation and UTP Connection:
(1) Site Selection: Please place Receiver in an appropriate place and have the
UTP cable settled for later connection; you can use magnetic pad to attach
the unit on metal plane or use attachable rack mounting kit to fix the unit
on selected area by screw or nail.
(2) Power Up: Plug power adapter to the Receiver and connect monitor and
speaker to the "VGA OUT" and "AUDIO" port. The POWER LED will turn on
green to indicate the POWER ON status and the LED above RJ-45 port
should blink to indicate the AV signal unconnected status.
(3) Selection of UTP Cable: For best VGA resolution, please use Cat5
Enhanced cable (350MHz bandwidth) for connection, please noted that the
maximum extended length of one section (one pair of Transmitter or
Receiver) should not exceed 300 meters. The connector must be made by
568B/568B type.
PAIR 3
PAIR 2
PAIR1
1
2
3
4 5
Jack Position
(4) Connect UTP Cable:
Installation Diagram of Receiver AVE-301R
The EIA/TIA definition of 568B in the
PAIR4
pin assignment is (1)orange white,
(2)orange, (3)green white, (4)blue,
6
7
8
(5)blue white, (6)green, (7)brown
white, and (8)brown.
10 / 16
VGA and Audio Cat-X AV Extender