DataBay DVIE-101T Manual del usuario - Página 17
Navegue en línea o descargue pdf Manual del usuario para Extensor DataBay DVIE-101T. DataBay DVIE-101T 20 páginas. Cat5 dvi-d + audio extender family
También para DataBay DVIE-101T: Manual del usuario (14 páginas)
Imprimir páginaStack More Transmitters to Have More Displays
1. If you would like to broadcast more monitors and speakers, you
can connect another layer of same series Cat5/5e/6 DVI-D + Audio
Transmitter. You can connect additional Transmitter from "VIDEO/
AUDIO IN" port or "RJ-45 VIDEO and RJ-11 AUDIO" ports:
(1) From "VIDEO/AUDIO OUT": Use one set of standard DVI/Audio cable,
one end connect from the "VIDEO/AUDIO OUT" port of the first layer'
s Transmitter and the other end to "DVI/AUDIO IN" port of the second
layer's Transmitter. (Refer to following connection
(2) From "RJ-45 VIDEO and RJ-11 AUDIO": Similar to the way of
connecting monitor and speaker, you connect DVS-DR and DVS-
AR to the "VIDEO/AUDIO IN" port of the second layer's Transmitter.
The length for this extension should between 10 to 5 meters and
the total extended length and resolution is about 800x600@0m,
104x768@15m, 180x104@10m. Previous range can be applied
in most of the application, but in some cases it might change. It will be
appropriate to test the capacity of display before installation. (Refer to
following connection
Short Range
Receiver
x 8
❶
10-0 m
Diagram of Connecting another Layer of Cat5/5e/6 DVI Transmitter
. To ensure the transmitting quality of DVI-D signal, more than two layer of
stacking is not recommended.
. The transmitter can be , 4, or 8 port model.
❷
)
Long Range
Projector
Receiver
x 4
❷
5 m
❶
)
PDP
DVI Projector Monitor
Cat5/5e/6 + Phone cable
Standard DVI, Audio cable
DVI
Audio
DVI+Audio cable
LCD
17