DataCard SP75 Plus Ficha de datos

Navegue en línea o descargue pdf Ficha de datos para Accesorios para impresoras DataCard SP75 Plus. DataCard SP75 Plus 2 páginas. Color ribbons, duragard laminates and topcoats
También para DataCard SP75 Plus: Ficha de datos (2 páginas), Manual complementario (2 páginas), Especificaciones (1 páginas), Folleto (5 páginas), Folleto y especificaciones (4 páginas), Manual complementario (2 páginas), Especificaciones (2 páginas), Manual de instalación rápida (8 páginas), Manual complementario (2 páginas), Manual de instalación rápida (12 páginas)

Imprimir página
DataCard SP75 Plus Ficha de datos
SPECIFICATIONS:
Yield: See attached tables for card yields. Listed yields are approximate number of cards/images
that can be produced per supply unit. Actual yields may vary due to number of printer
initializations, user loading procedures, and other waste factors.
Industry Specifications: All DuraGard 1.0 Mil Clear laminates offer superior tamper and
moisture resistance; as well as exceed the following industry standard specifications:
ISO/IEC 7810
ISO/IEC 10373-1
ANSI INCITS 322-2002
Storage and Shipping:
Temperature: 32 – 90° F (0 - 38° C)
Humidity: 20 - 70% RH, non-condensing
Sunlight: No direct exposure to sunlight
Laminate Dimensions:
PRINTER
®
Datacard
SP75 Card Printer
®
Datacard
ImageCard
®
Datacard
Magna™ Class Card
Printers
** Margin is the distance between the edge of the card and the edge of the laminate.
Configurations Available:
Full card, full card with smart card cutout, full card with smart card window
•
Magnetic stripe
•
Other configurations available upon request
•
Usage Recommendations:
Datacard Group recommends the use of composite cards with a minimum of 20% polyester
•
core between top and bottom layers of PVC
When using DuraGard laminates with color ribbon, select a ribbon without a T-panel or deslect
•
the use of the T-panel within the printer driver.
™
DATACARD
CERTIFIED SUPPLIES
DATACARD
FOR USE IN DATACARD
PRINTERS
Polyester laminates designed to extend the life of
•
national ID, driver's license, and other ID cards
Datacard
•
tamper and moisture resistance
Virtual edge-to-edge laminates available for the
•
Datacard
laminates in the card industry
2.06 inches
52.32 mm
®
IV Card Printer
2.00 inches
50.80 mm
2.00 inches
50.80 mm
®
® ® ® ®
DURAGARD
® ® ® ®
®
®
DuraGard
1.0 Mil laminates offer superior
®
SP75 Card Printer are the largest CR80 sized
WIDTH
HEIGHT
3.31 inches
84.07 mm
3.25 inches
82.55 mm
3.25 inches
82.55 mm
® ® ® ®
CLEAR LAMINATES
DESKTOP CARD
MARGIN **
0.016 inch
0.40 mm
0.031 inch
0.79 mm
0.031 inch
0.79 mm