Caviblaster 1325-G Manual de uso y mantenimiento - Página 4

Navegue en línea o descargue pdf Manual de uso y mantenimiento para Equipos de limpieza Caviblaster 1325-G. Caviblaster 1325-G 13 páginas.

6. Connect the 1" red rubber by-pass hose to the cam-lock plug on the pressure-regulating

unloader (Figure 11). The by-pass hose has a cam-lock socket on one end. Direct the bypass

hose away from the working area and secure the hose.

7. Connect the Dual ¼" black rubber fuel lines from the external fuel tank to the fuel lines

attached to the fuel filter and engine. This connection is made with a quick connect fitting

(Figure 12).

Starting the CaviBlaster

1. When using the feed pump, start the feed pump

by pulling the feed pump switch located on the

cart handle (Figure 13) up to the "ON"

position. When using a supplied water source,

open the valve to supply water to the system.

2. Ensure that the system is primed with water

and that there are no leaks in the system. The

pressure pump is a positive displacement pump

and water must be supplied under pressure.

Failure to pump feed water to the pressure

pump will result in damage to the pump.

3. Once the system is primed, turn the feed pump

off (Figure 13) by pushing the switch down.

4. Connect the ½" high-pressure hose to the quick-connect

plug near the pressure- regulating unloader (Figure 14).

The high- pressure hose has a brass quick-connect socket

on the end. The CaviBlaster

required pressure utilizing up to 300 feet of ½" diameter

rubber hose or 600 feet of thermoplastic hose.

greater lengths or

For More information please email [email protected] or call 1-(352)275-5319

Figure 11

power unit:

1325-G can deliver the

CaviBlaster 1325-G Operations Manual

Using

Page - 4

Figure 12

Figure 13

Figure 14