Datacom Systems 4X16SP-1000BT Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Interruptor Datacom Systems 4X16SP-1000BT. Datacom Systems 4X16SP-1000BT 20 páginas. Copper gigabit span switch
También para Datacom Systems 4X16SP-1000BT: Hoja de especificaciones (1 páginas)

Imprimir página

Rear Panel Description —

Gigabit SPAN switch rear panel. This is the location for power source inlet connec-

tions, serial number (SN) and media access control (MAC) address information.

Figure 3 - 4X16SP-1000BT Rear Panel

An explanation of each follows:

Power Connectors — 100-240 VAC 50-60 Hz. Two inlet power source circuit IEC 320 connections are pro-

vided. Use of a second different external power source circuit than the first is strongly

recommended to assure uninterrupted operation. Furthermore, connecting the second

power source circuit to a different external power source circuit than the first helps to

eliminate power as a single point of failure. The POWER 1 and 2 LEDs on the front

panel illuminate indicating power 1 and 2, respectively, are on. Either LED not illumi-

nated indicates a lack of power and immediate investigation is required to insure redun-

dant power integrity.

SN — Serial Number (SN). A number that identifies Datacom Systems electronic equipment such as the

4X16SP-1000BT Copper Giagbit Switch.

MAC — Media Access Control (MAC) address, a hardware address that uniquely identifies each node (this

4X16SP-1000BT Copper Giagbit Switch) of a network.

4X16SP-1000BT Copper Gigabit SPAN Switch • USERguide

Datacom Systems Inc

Figure 3 illustrates the Copper