ELRO AG40MA11 Manual

Navegue en línea o descargue pdf Manual para Accesorios ELRO AG40MA11. ELRO AG40MA11 2 páginas. Door- / window sensor

MOUNTING

Remove the ba ery cover (d) and mount it using either adhesive tape or screws, and then a ach the sensor (a)

and ﬁx it with the screw at the bo om. When using screws, use the ba ery cover as a mold to mark drilling

holes. Next, ﬁt the magnet (b) to the door (or, in the case of double doors, to the most commonly used door).

Ensure that the parallel gap (g) between the magnet and sensor is less than 10mm and the magnet is aligned

with the sensor by using the lines in the middle of both the sensor and the magnet.

(a)

(b)

32mm

(g)

(d)

For more informa on about the HOME ALARM SYSTEM AG400011 visit www.elro.eu

Symbols:

Recycling and disposal: The WEEE symbol (a) means that this product and ba eries must be disposed

separately from other household waste. When it reaches its end of life, take it to a designated waste collec on

point in your area to guarantee a safe disposal or recycling. Protect the environment, human health and natural

resources! Read the manual (b) before use and store it in a safe place for future use and maintenance.

ELRO Europe | www.elro.eu

Postbus 9607 - Box E800

GUARANTEE

1006 GC Amsterdam - Nederland

Visit www.elro.eu

IMPORTANT WARNING:

This package can contain small parts and/or

materials which can be dangerous to small

children! Be aware of this, and keep this away

from small children!

SPECIFICATIONS

Ba eries: 1,5V / AAA x 3

Frequenty: 868 MHz

Range: Min.100m in open air

Measurements sensor: 120 x 28 x 20 mm

Measurements magnet: 45 x 9 x 15 mm

55mm

(a)

(b)

-3-

DOOR- / WINDOW SENSOR

Home is not a place, it's a feeling

MANUAL EN

AG40MA11