4IPNET EAP737 Manual de instalación rápida - Página 9

Navegue en línea o descargue pdf Manual de instalación rápida para Punto de acceso inalámbrico 4IPNET EAP737. 4IPNET EAP737 18 páginas. Enterprise

2. Connect the EAP737 to your network device.

Connect one end of the Ethernet cable to the Uplink port of EAP737 and the other end of the cable to a switch,

a router, or a hub. EAP737 is then connected to your existing wired LAN network.

3. Power on the EAP737.

There are two ways to supply power over to EAP737.

- EAP737 Uplink port is capable of receiving DC currents. Connect an IEEE 802.3af-compliant PSE

device (e.g. a PoE-switch) to the Uplink port of EAP737 with the Ethernet cable.

- Connect a 12V/1.5A adaptor (optional) to the DC power jack. If needed.

Now, the Hardware Installation is complete.

 Using a different power adapter may damage this system.

 To verify the wired connection between EAP737 and you switch / router / hub, please also

check the LED status indicator of the respective network devices.

EAP737 Enterprise Access Point

Quick Installation Guide

ENGLISH