Addvent AVAC9000 Instrucciones de instalación y manual del usuario - Página 13
Navegue en línea o descargue pdf Instrucciones de instalación y manual del usuario para Aire acondicionado Addvent AVAC9000. Addvent AVAC9000 19 páginas.
También para Addvent AVAC9000: Instrucciones de instalación y manual de usuario (17 páginas)
Imprimir página
3. The unit will shut down automatically after the SLEEP function has been
running for 12 hours.
4. Please note, the sleep function is not available while the machine is working
in AUTO, FAN (ventilation) or DEHUMIDIFICATION mode.
5. When the machine is in the Sleep function, the Fan Speed is set at LOW
speed.
Dehumidify (DRY) mode
In dehumidify (DRY) mode, the temperature cannot be adjusted, the
ventilation will fix at low speed. When the unit is operating in Dehumidify
(DRY) mode, humidity extracted from the air is collected in an internal tank.
If the tank reaches full, the compressor and motor cut out automatically.
At the same time, the "Water Full" indicator illuminates. An alarm will also
sound. When the tank is full, drain the water as shown on page 12.
You may also use the unit without having to empty the tank so often by using
"continuous drainage", please also refer to page 12.
Self-diagnosis
This machine is equipped with a self-diagnosis function. If a fault develops, the
display window will display "E1" or "E2". At this time, please contact Addvent
(0117 9235375).
All the above functions can also be performed
with the supplied remote control.
The remote control requires 2pcs
AAA batteries to operate (not included).
Important
1. To prolong the compressor's life, after turning off the unit,
please wait for
3 minutes (at least) before turning back on.
2. The cooling system will switch off if the ambient temperature is lower than
the set one. The ventilation, however, keeps working on the set level. If the
ambient temperature rises above the selected level, the cooling will return
to operation.
13
FIG. 14