4IPNET OWL300 Manual de instalación rápida - Página 8
Navegue en línea o descargue pdf Manual de instalación rápida para Punto de acceso inalámbrico 4IPNET OWL300. 4IPNET OWL300 19 páginas. Outdoor access point
Imprimir página
1
Wall Mounting Holes
2
Pole Mounting Gap
3
5G LED
4
2.4G LED
5
LAN (PSE) LED
6
LAN (PD) LED
7
Status LED
8
Power LED
9
Ground Connector
10
Uplink Port
11
LAN Port
12
Restart / Reset
Copyright © 4IPNET, INC. All rights reserved.
OWL300 Bottom
For hanging OWL300.
For mounting OWL300.
5G Wi-Fi status. The 5G LED will blink when there is 5G traffic.
2.4G Wi-Fi status. The 5G LED will blink when there is 2.4G traffic.
LAN status. The LAN (PSE) LED will light up when there is traffic passing
through the LAN port.
LAN status. The LAN (PD) LED will light up when there is traffic passing
through the Uplink port.
OWL300 status. The Status LED will start blinking when the restart/reset button
is pressed. For the first 5 seconds, the LED will blink slowly (restart), and after
5 seconds, the LED will start blinking quickly (reset).
Power status. The Power LED will always on when OWL300 is power-on.
For connecting to ground wire.
Offers uplink connection. This port can be used to connect to a controller,
gateway, or directly to the Internet. 802.3at PoE is also supported.
The ports for connections with LAN side devices. It also support 802.3af PoE.
Press once to restart the system; hold for more than 5 seconds to reset the
system to factory default settings.
3
Quick Installation Guide
OWL300 Outdoor Access Point
ENGLISH