DataCube DC-485V Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Adaptador DataCube DC-485V. DataCube DC-485V 15 páginas.

6. VGA Display

After the DataCube has been initialized, a video signal is output through the VGA port. To

access the signal, use an RGB cable that has a D-sub 9-pin connector to connect the port to

the VGA port of a display device. The output resolution is 800 by 600 dpi.

There are two types of output image. One is the Measurement Value screen (shown below)

and the other is a user-set image.

The user-set image is any photograph selected by the user for display on the screen.

■ Displaying a user-set image

Save a JPEG file in the image folder in the USB memory device.

When the USB memory device is inserted into the DataCube, the image will be displayed

after a 10-second interval.

Notes:

If the size of the JPEG exceeds 1280 by 1024 pixels, it cannot be displayed.

For the best display, use an 800 by 600 pixel, 24-bit color image file.

Do not store more than 10 image files in the memory device.

Measurement Display Screen

DataCube User Manual