Elsema Gigalink GLR2708 Manual - Página 2
Navegue en línea o descargue pdf Manual para Receptor Elsema Gigalink GLR2708. Elsema Gigalink GLR2708 7 páginas. 8-channel 27mhz receiver with open collector outputs
También para Elsema Gigalink GLR2708: Instrucciones de instalación y programación (8 páginas)
Imprimir página
Different Modes for each Output
Modes are user selectable from the 4-way dip switch, shown below.
(Dipswitch 4 is reserved for specific customer mode. Normally not used.)
The output relay will respond in the following manner when receiving the correct signal from a
"All Momentary": Relay on, only while correct signal is received
"All Latching": Outputs alternate at every correct incoming signal
"Momentary & Latching": Outputs 1-4 are momentary & 5-8 are latching
"Security Latching on": Outputs will be on until supply to receiver is momentarily
interrupted
"Momentary & Latching ": Outputs 1-6 are momentary & 7-8 are latching
"Momentary & Latching ": Outputs 1-2 are momentary & 3-8 are latching
"Momentary & Latching ": Outputs 1-3 are momentary & 4-8 are latching
"Security Latching on": Output 1 is security latching & 2-8 are momentary
Momentary - Output is active for as long as the transmitter button is pressed.
This is a standard mode on most automatic gates or garage door openers.
Latching
- Output remains active until next press of the transmitter button.
Similar to switching "on" and "off" a light.
Security
- Output remains active until power to the receiver is removed. Similar to security alarms
and fire alarms.
Latching
Customised Software
Custom output modes can be programmed to do special functions. Call Elsema for more details.
8-Channel 27MHz GIGALINK™ Receiver with open collector outputs, GLR2708
DIP Switch Mode Settings
transmitter
* Dipswitch 4 is reserved
- 2 -
ELSEMA