DATAGRABBER Rapid RH L6 Manual de instrucciones - Página 14

Navegue en línea o descargue pdf Manual de instrucciones para Registradores de datos DATAGRABBER Rapid RH L6. DATAGRABBER Rapid RH L6 20 páginas.

WAGNER METERS

Write Settings to Device

Whenever you change the configuration of the DataGrabber,

you must click the Write Settings to Device button in order to

save the settings.

Default Settings

If you wish to use the acclimation time and log interval settings

as the default settings for one or more additional DataGrabbers,

click the Save Defaults button. This saves the settings displayed

as your default settings. Then select another DataGrabber and

go to the Settings screen. Click the Load Defaults button. The

default settings will now be displayed for this device. Be sure to

also click the Write Settings to Device button to save the default

settings to this DataGrabber.

Start and Stop

After you have saved the desired settings and are ready to begin

the acclimation period for your RH testing, click the Start button

to signal to the DataGrabber to begin the acclimation time.

NOTE: The clock in the DataGrabber will automatically

synchronize to the clock on your mobile device.

UPLOADING/STORING SENSOR DATA

After you have configured your DataGrabber device to collect

RH test data for you automatically, you can return to the job site

later to upload and store your data on your mobile device.

Uploading data

Select your DataGrabber device on the Devices screen of the

DataMaster L6 app, then click "Save to Map" to upload the L6

sensor data to your mobile device and display the entire list of

time and date-stamped RH and temperature data.

Storing readings to a specific map location

At the screen displaying the L6 sensor data, you also have

the option to "Store Readings. " This stores the readings to the

specific map location, assuming the L6 Smart Sensor has been

included on the job map. If no job map has been created or the

sensor has not yet been added to the map, you can create the

map and add the sensor to the job map if desired.

12 WWW.RAPIDRH.COM