DATAGRABBER RapidRH L6 with Bluetooth Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Registradores de datos DATAGRABBER RapidRH L6 with Bluetooth. DATAGRABBER RapidRH L6 with Bluetooth 11 páginas.

Imprimir página

RAPID RH L6

Each DataGrabber can be configured for device name,

acclimation time, and log interval. From the Devices

screen, select the DataGrabber you wish to configure. Next,

click the Settings button. The DataGrabber is available for

configuration if the Settings button is green. If the Settings

button is grey, then you will need to troubleshoot the device's

connection and/or check the battery.

Device Name: This will be the unique identifier of your

device. The device name can be up to 12 characters long.

Acclimation Time: The Acclimation period is the time

(number of days) from the start that the DataGrabber will

automatically capture (grab) a measurement and store in

the L6 Smart Sensor's memory as the acclimated time

measurement of both RH and temperature. For instance,

setting an acclimation time of one day and then starting, the

DataGrabber will wait 24 hours and "grab" a measurement

for storage in the L6 Smart Sensor's memory. In most cases,

it is highly recommended to use one day as the acclimation

time, given that 24 hours is the wait time specified by the

ASTM F2170 standard for getting official, documentable RH

readings. After this first measurement, other periodic logging

continues to occur regardless of the acclimation time period.

Log Interval: Set the desired time (number of hours)

between periodic readings. These are the readings that will

be "grabbed" after the initial acclimation time has occurred.

Write Settings to Device: Whenever you change the

configuration of the DataGrabber, you must click the Write

Settings to Device button in order to save the settings.

Default Settings: If you wish to use the acclimation time and

log interval settings as the default settings for one or more

additional DataGrabbers, click the Save Defaults button.

This saves the settings displayed as your default settings.

Then select another DataGrabber and go to the Settings

screen. Click the Load Defaults button. The default settings

will now be displayed for this device. Be sure to also click

the Write Settings to Device button to save the default

settings to this DataGrabber.

Start and Stop: After you have saved the desired settings

and are ready to begin data logging, click the Start button

to signal to the DataGrabber to begin the acclimation time.

Time and date-stamped data logging begins as soon as the

acclimation time is completed.

Note: The clock in the DataGrabber will automatically

synchronize to the clock on your mobile device.

WAGNER METERS