Cayin iHA-6 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Amplificador Cayin iHA-6. Cayin iHA-6 11 páginas.

FUSE

If in case you need to change the fuse, please resort to replacement fuse with

same specification with the original.

Power input connector

Note: Please make sure the AC Voltage Selector is setup correctly for your local

power supply voltage. Incorrect input voltage setting will cause damage to the

machine or might even lead to serious household accident, Cayin reserves the right to

refuse service or responsibility on related instances.

Preparation

Verify that the AC input voltage selector has been set correctly for your local

power supply voltage

Plug in a power cord and connect to a AC power outlet

Connect your audio source to the amplifier by an appropriate audio cable. You

can choose either BAL or AUX input according to the connection facilitated by

your audio source equipment (selectable from the "Source" button on the front

panel). You can connect both BAL and AUX if so desired.

When connecting a RCA (single-ended) audio cable, please connect the

Right channel to the Red connector of the AUX (A) connection, and then the

Left channel to the White connector, connect the other side of the audio

cable to the RCA output of your source equipment (DAC or CD player)

When connect a XLR (Balanced) audio cable, insert the male connector to

the BAL (B) connection, please make sure the Left and Right channel are

connected properly. Please refer to the following diagram for detail.

Single-ended Headphone

Connect the 6.3mm phone connector of your headphone to the headphone

output (connection "6") on front panel. You can select either Headphone

Connection Diagram (to be provided)