Datalink Systems QBASE 915MHz Manual del usuario - Página 6
Navegue en línea o descargue pdf Manual del usuario para Módem Datalink Systems QBASE 915MHz. Datalink Systems QBASE 915MHz 17 páginas.
Imprimir página7.2.2 Left section
Message Window
Shows info (blue), warning (yellow) and error (red) messages.
Zoom In
Zoom Out
Pan to ...
?
Select if you wish to pan to the UAV, to the mission or
if you wish to search for an address.
Select Map
make sure QBase is connected to the internet.
Wind Settings
Zoom in to select the
20 km
The button becomes visible when zoomed in. Select the
7.2.3 Right section
The right section of QBase includes the relevant buttons for planning and monitoring a mission (see chapter 7.3 & 7.6).
Monitoring UAV
Monitor the UAV during the mission accomplishment.
Mission Template
Area Planning
7.2.4 Footer
UAV Command
UAV Command
Enables the user to control the Trinity via QBase (see chapter 7.6.2)
Payload Info
Payload Info
Information about the current state of the payload (see chapter 7.6.3.)
•
By clicking left on the
•
The waypoints of the mission are numbered and shown in purple.
•
The current waypoint is framed.
•
•
Zoom in and out with the mouse wheel.
•
Use Autoscale
Mission Info
Mission Info
Gives an overview of the planned mission (see chapter 7.3 step 51).
Scale
and select
New Measurement
Flight Planning
waypoints.
Read / Write Flight Plan
7 QBase – ground control station
Map Settings
Adjust the display settings of the map.
to measure a distance between two locations.
Scale
again to close the measurement tool.
Trinity user manual | 15