DataLocker Sentry K300 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Teclado DataLocker Sentry K300. DataLocker Sentry K300 19 páginas. Encrypted keypad mssd with oled screen
También para DataLocker Sentry K300: Manual de implantación (10 páginas), Manual del revisor (10 páginas)

Imprimir página

1. Password Reset

3. Click the Checkbox for auto-locking the device and set the time-out to one of the following

time intervals: 5, 15, 30, 60, 120, or 180 minutes.

To run CHKDSK (Windows only):

1. Unlock the device.

2. Press the WINDOWS LOGO KEY + R to open the Run prompt:

3. Type CMD and press ENTER.

4. From the command prompt, type CHKDSK, the PRIVATE USB drive letter, then "/F /R". For

example, if the PRIVATE USB drive letter is G, you would type: CHKDSK G: /F /R

5. Use data recovery software if necessary in order to recover your ﬁles.

Features

Standalone Logins

Requesting Standalone Logins

Standalone mode allows the Secure Volume of the Sentry K300 to be accessed by any computer

that has support for removable storage. Standalone mode is controlled by a policy that is set by

your SafeConsole Administrator. If this mode is not available, please contact them to enable this

feature. SafeConsole administrators will deﬁne the maximum allowed times the Sentry K300 can be

unlocked in Standalone mode before the device needs to be returned to a Windows computer to

check in.

To request Standalone logins, perform the following steps on a workstation that has a valid connec-

tion to the SafeConsole server:

1. Connect the Sentry K300 in SafeConsole mode. See the

tion.

2. On the K300 Control Panel, click the Gear Icon to open up settings.

3. Select the Standalone tab.

4. Select the reason for the request or enter a custom reason. This information will be sent to the

SafeConsole Administrator.

5. Click the Request button. You will receive the maximum number allowed.

Note: The Request automatically checkbox can optionally be enabled by your SafeConsole

Administrator. If available, the control panel will automatically try to request more Standalone logins

after unlocking on a Windows workstation when checked.

Sentry K300 Managed User Guide

SafeConsole Mode

for more informa-