Elsner Suntracer KNX basic Series Especificaciones técnicas e instrucciones de instalación - Página 8

Navegue en línea o descargue pdf Especificaciones técnicas e instrucciones de instalación para Estación meteorológica Elsner Suntracer KNX basic Series. Elsner Suntracer KNX basic Series 12 páginas.

Imprimir página
For 24V devices the connection cable must be plugged in between the cover and circuit
board.

2.2.4. PCB layout

230 V AC version
1
6
7
Weather Station Suntracer KNX basic • Status: 15.07.2013 • Technical changes reserved. Errors reserved.
8
Fig. 10
Remove the cable shielding under the circuit
board and only feed the connector cables up-
wards through the openings in the circuit
board.
2
3
4 5
Installation and commissioning
Fig. 11
1
Cable connection to the rain
sensor in the housing cover
2
Opening for the cable for the
voltage supply
3
Tension clamp for voltage
supply (230 V AC),
suitable for massive conduc-
tors of up to 1.5 mm² or con-
ductors with fine wires
4
Opening for bus cable
5
Slot for KNX clamp +/-
6
Programming pushbutton for
the teach-in of the device
7
Programming LED