Datalogic DS2x00N-DS4800 Series Procedimiento de configuración mediante programación de códigos de barras - Página 20

Navegue en línea o descargue pdf Procedimiento de configuración mediante programación de códigos de barras para Lector de códigos de barras Datalogic DS2x00N-DS4800 Series. Datalogic DS2x00N-DS4800 Series 20 páginas.

Imprimir página
7 PARAMETER SETTING SUMMARY
The network setup through programming barcodes automatically sets all the necessary
parameters in order to produce a consistent and correct configuration.
The following table summarizes the modified values and the related programming actions.
Programmed Code
Stand Alone
Master Synchronized
Slave Synchronized
Master Multidata
Slave Multidata
Ethernet TCP/IP
DHCP Enabled
Ethernet TCP/IP
DHCP Disabled
*
This setting only occurs if the starting Operating Mode is Continuous or Automatic
**
The Factory Default static IP Address parameter settings are:
IP Address = 172.16.11.0
Subnet Mask = 255.255.0.0
Gateway Address = 172.16.0.2
20
Modified Parameters
Topology Role = Other
Reading System Layout/Local Device Alternative Network Setting = Alone or Id-Net
Topology Role = Master Synchronized
Operating Mode/ Operating Mode Selection = On Line
Topology Role = Slave Synchronized
Slave Address = xx
Operating Mode/ Operating Mode Selection = On Line
Topology Role = Master Multidata
Topology Role = Slave Multidata
Slave Address = xx
CBX Gateway>Host Interface Type = Ethernet TCP/IP
IP Addressing = DHCP
CBX Gateway>Host Interface Type = Ethernet TCP/IP
IP Addressing = Static Assignment (uses static IP address parameters)
18/12/09
Setup Procedure Using Programming Barcodes
*
*
**