elsner elektronik 20550 Especificaciones técnicas e instrucciones de instalación - Página 3
Navegue en línea o descargue pdf Especificaciones técnicas e instrucciones de instalación para Accesorios elsner elektronik 20550. elsner elektronik 20550 5 páginas. For ws1 color/style, (knx) ws1000 color/style
También para elsner elektronik 20550: Especificaciones técnicas e instrucciones de instalación (2 páginas)
Imprimir página
2.2.
Layout
2.3.
Rear view
2.4.
Installation
First install the junction box. Seal the inlet tubes in order to prevent drafts.
Connect the power supply +/- to the connector terminals provided for this purpose on
the sensor board. Then screw the board/base plate onto the socket. Ensure that the
front side with the writing „TOP" is directing out of the wall and that the arrows point
towards the top.
Position the frame of the switching programme. Insert the housing of the sensor firmly
onto the base plate using the catches, so that the housing and frame are fixed together.
Indoor Sensor WGTH-UP • Version: 13.12.2016 • Technical changes and errors excepted.
3
Fig. 1
1
Openings for air circulation
2
Opening programming LED
1
4
Opening programming button
for configurating the device
5
Openings for air circulation
(BOTTOM)
2
3
4
Fig. 2
1
Connection for power supply
7...30 V DC (+/-)
1
Installation of the indoor sensor