Dust Free 350 SERIES Manual de instalación y mantenimiento - Página 3

Navegue en línea o descargue pdf Manual de instalación y mantenimiento para Limpiador de aire Dust Free 350 SERIES. Dust Free 350 SERIES 7 páginas.

UNIT OPERATION

1. Remove the plastic wrapping from the optional carbon mesh filter or the other granulated

adsorbents in disposable frames.

2. Place the unit in the desired location.

3. Plug unit into a power outlet supplying proper voltage.

OPERATION

Once all wrappings have been removed the unit is ready for operation by turning the control knob

to maximum. Series 250 and 350 units have been designed to provide you with years of service.

For best performance and filter life, it is recommended that units be run continuously. Series

250 and 350 units employ air pattern management, circulating clean air throughout the room and

forcing dirty air into its four sides for cleaning. The units should be placed at least 8" from the

wall and purified air is blown toward the center of the ceiling. Air flow louvers can be adjusted to

direct air flow. The fan speed should be set to obtain the air flow desired, using the speed control

switch.

Do not operate unit for long periods of time without all filters in place.

Do not operate unit in a wet environment. Electric shock could occur,

causing injury or death.

Do not place hands or objects in air vent, serious damage to limbs

and the unit itself will occur.