Datalogic GRYPHON Mx30 Manual de consulta rápida - Página 6
Navegue en línea o descargue pdf Manual de consulta rápida para Lector de códigos de barras Datalogic GRYPHON Mx30. Datalogic GRYPHON Mx30 18 páginas.
Imprimir páginaDATALOGIC
CHARGING THE BATTERIES
By placing the reader onto the OM-Gryphon™ cradle or C-Gryphon™ battery
charger it is possible to charge the Gryphon™ M batteries. Make sure the
charging LED goes on.
The LEDs positioned on the cradle signal the charge status, as described in the
following table:
LED
Power on /
Data
Charging
Charge
completed
Charging
Charge
completed
Reconditioning battery
button
Power on / Data
(yellow LED)
After many recharging cycles NiMh and NiCd batteries may tend to lose their
operating autonomy. This condition can be overcome by positioning the
Gryphon™ M onto the OM-Gryphon™ / C- Gryphon™ charger and pressing the
"battery reconditioning" button.
2
Yellow On = OM-Gryphon™ is powered.
Yellow Blinking = OM-Gryphon™ receives data and
commands from the Host or the reader.
Red On = the battery charge is in progress.
Red Blinking = the battery reconditioning is in progress.
Green On = the battery is completely charged.
+
Red and Green Blinking together = the reader is not
correctly placed onto the reader.
STATUS
Charging
(red LED)
Charge completed
(green LED)