Datalogic MAGELLAN 1400I Manual de consulta rápida - Página 8

Navegue en línea o descargue pdf Manual de consulta rápida para Lector de códigos de barras Datalogic MAGELLAN 1400I. Datalogic MAGELLAN 1400I 13 páginas. Omni-directional imaging scanner

Imprimir página

Using the Stand

The latch on the back of the stand is used for

locking and unlocking the stand to the scanner.

(Before placing the scanner in the stand, make

sure the latch is pulled all the way outward.)

With the latch in its outward position, the stand

will function as a dock for the scanner that will

remain on the counter when the scanner is

picked up for handheld scanning. To lock the

stand to the scanner, place the scanner into the

stand and push the latch in toward the scanner

until it clicks.

The stand can also be permanently attached to a wall or countertop using

screws through the mounting holes provided on the base of the stand.

How to Scan

Three scanning modes are provided:

1. On Counter Omni-Directional Scanning

Present or "sweep" items in front of the

scanning window as shown. The "sweet

spot" of the scanning zone is between 1"

(3cm) to 6" (13cm) directly in front of

the scan window.

2. Handheld Omni-Directional Scanning

Best used for scanning items that are too

large or awkward to present to the scan-

ner when it is on the counter. Pick up the

scanner and present it to the bar code on

the item to scan until a good read occurs.

"Sweet Spot"

(13cm)

(3cm)

Magellan

1400i