elsner elektronik IMSG-UC-2H Manual de datos técnicos - Página 2
Navegue en línea o descargue pdf Manual de datos técnicos para Unidad de control elsner elektronik IMSG-UC-2H. elsner elektronik IMSG-UC-2H 8 páginas. Motor control unit
También para elsner elektronik IMSG-UC-2H: Especificaciones técnicas e instrucciones de instalación (2 páginas)
Imprimir página
Product description
The IMSG-UC-2H motor control unit allows two 230V drives to be controlled. The unit
offers the possibility of operating the connected motors via integrated buttons or
manually via up/down hand switches.
Functions:
•
For two 230V drives (Up/Down)
•
With key pad (manual operation) and status LEDs
•
2 hand switch connections (extension inputs) for unlocked double button
(manual operation on the spot, can be set to Standard or Comfort mode)
•
Central and extension inputs with variable voltage (6...80 V DC, 6...240 V AC)
•
Setting the central control unit to "Deadman" or "Latch"
•
Commands at the central and button inputs have the same priority
•
Storing one movement position per drive
•
Pause to reverse direction 1 second, motor runtime 240 seconds
•
Connect through clamps
•
Potential-free relays
Central operation
The central input of the IMSG-UC-2H allows, for example, an automatic control unit, a
timeswitch or a normal, unlocked double button (Up/Down) to be connected. The central
command (continuous voltage) always has priority over a movement command from the
extension inputs.
LED signals during central control (continuous voltage):
During movement:
Runtime reached:
If there are "Up" and "Down" movement commands at the central input at the same
time, the drive moves up (secure position)
The central control unit can be set to the operating modes "Latch" (default)
or "Deadman". You can switch between the operating modes using the following buttons
integrated on the device:
2
Motor control unit IMSG-UC-2H • Status 02/08/2011 • Subject to technical changes. Errors excepted.
Channel LEDs in the direction of movement flash every 2 seconds
Channel LEDs in the direction of movement continue to flash
every 2 seconds
Press the
button of channel 1 and the
5 seconds at the same time
button of channel 2 for