Dustbane Gladiator 1050 Ride-On Manual rápido - Página 2

Navegue en línea o descargue pdf Manual rápido para Fregadora Dustbane Gladiator 1050 Ride-On. Dustbane Gladiator 1050 Ride-On 2 páginas.

Imprimir página
Emptying the bin:
Emptying the bin:
•
•
Release the bin lock.
Release the bin lock.
•
•
Pull out the rear bin by means of
Pull out the rear bin by means of
EMPTYING THE BIN
its handle.
its handle.
•
•
Take the bin (which is fitted with
Take the bin (which is fitted with
Release the bin lock.
Emptying the bin:
Emptying the bin:
wheels) to the rubbish collection
wheels) to the rubbish collection
•
•
Release the bin lock.
Release the bin lock.
Pull out the rear bin by means of its handle.
point and empty it.
point and empty it.
•
•
Pull out the rear bin by means of
Pull out the rear bin by means of
Take the bin (which is fitted to the wheels) to the rubbish
its handle.
its handle.
Emptying the bin:
collection point and empty it.
•
•
Take the bin (which is fitted with
Take the bin (which is fitted with
•
Release the bin lock.
wheels) to the rubbish collection
wheels) to the rubbish collection
•
Pull out the rear bin by means of
point and empty it.
point and empty it.
its handle.
•
Take the bin (which is fitted with
wheels) to the rubbish collection
point and empty it.
INSPECTING AND REPLACING THE CENTRE BRUSH
INSPECTING AND REPLACING THE CENTRE BRUSH
•
•
Unscrew the knob and open the door on the left of the machine.
Unscrew the knob and open the door on the left of the machine.
•
•
Unscrew the three knobs securing the brush compartment cover.
Unscrew the three knobs securing the brush compartment cover.
INSPECTING AND REPLACING THE CENTRE BRUSH
•
•
Pull out the brush cover compartment.
Pull out the brush cover compartment.
•
•
Remove the brush, holding it on the plastic core.
Remove the brush, holding it on the plastic core.
Unscrew the knob and open the door on the left of the machine.
INSPECTING AND REPLACING THE CENTRE BRUSH
INSPECTING AND REPLACING THE CENTRE BRUSH
•
•
Remove the adapter from the core of the old brush and fit it to the new brush, taking care to keep the bristles
Remove the adapter from the core of the old brush and fit it to the new brush, taking care to keep the bristles
•
•
Unscrew the knob and open the door on the left of the machine.
Unscrew the knob and open the door on the left of the machine.
Unscrew the three knobs securing the brush compartment cover.
aligned in the same direction.
aligned in the same direction.
•
•
Unscrew the three knobs securing the brush compartment cover.
Unscrew the three knobs securing the brush compartment cover.
Pull out the brush cover compartment.
•
•
Fit the new brush and make sure that the adapter is inserted on the drive hub.
Fit the new brush and make sure that the adapter is inserted on the drive hub.
•
•
Pull out the brush cover compartment.
Pull out the brush cover compartment.
INSPECTING AND REPLACING THE CENTRE BRUSH
•
•
Replace the brush compartment cover using the knobs, following the dismantling operations in reverse order.
Replace the brush compartment cover using the knobs, following the dismantling operations in reverse order.
Remove the brush, holding it on the plastic core.
•
•
Remove the brush, holding it on the plastic core.
Remove the brush, holding it on the plastic core.
•
Unscrew the knob and open the door on the left of the machine.
•
•
Remove the adapter from the core of the old brush and fit it to the new brush, taking care to keep the bristles
Remove the adapter from the core of the old brush and fit it to the new brush, taking care to keep the bristles
Remove the adapter from the core of the old brush and fit it to the new brush, taking care to keep the bristles aligned in the same
•
Unscrew the three knobs securing the brush compartment cover.
aligned in the same direction.
aligned in the same direction.
•
Pull out the brush cover compartment.
direction.
•
•
Fit the new brush and make sure that the adapter is inserted on the drive hub.
Fit the new brush and make sure that the adapter is inserted on the drive hub.
•
Remove the brush, holding it on the plastic core.
Fit the new brush and make sure that the adapter is inserted on the drive hub.
•
•
Replace the brush compartment cover using the knobs, following the dismantling operations in reverse order.
Replace the brush compartment cover using the knobs, following the dismantling operations in reverse order.
•
Remove the adapter from the core of the old brush and fit it to the new brush, taking care to keep the bristles
Replace the brush compartment cover using the knobs, following the dismantling operations in reverse order.
aligned in the same direction.
•
Fit the new brush and make sure that the adapter is inserted on the drive hub.
•
Replace the brush compartment cover using the knobs, following the dismantling operations in reverse order.
ADJUSTING SIDE BRUSH HEIGHT
ADJUSTING SIDE BRUSH HEIGHT
•
•
Move the side brush to the working position.
Move the side brush to the working position.
•
•
Loosen the adjustment screws on the brush motor support.
Loosen the adjustment screws on the brush motor support.
•
•
Manually move the brush to the required position.
Manually move the brush to the required position.
ADJUSTING SIDE BRUSH HEIGHT
•
•
Tighten the adjustment screws.
Tighten the adjustment screws.
ADJUSTING SIDE BRUSH HEIGHT
ADJUSTING SIDE BRUSH HEIGHT
•
•
Move the side brush to the working position.
Move the side brush to the working position.
Move the side brush to the working position.
•
•
Loosen the adjustment screws on the brush motor support.
Loosen the adjustment screws on the brush motor support.
Loosen the adjustment screws on the brush motor support.
•
•
Manually move the brush to the required position.
Manually move the brush to the required position.
ADJUSTING SIDE BRUSH HEIGHT
•
•
Tighten the adjustment screws.
Tighten the adjustment screws.
Manually move the brush to the required position.
•
Move the side brush to the working position.
•
Loosen the adjustment screws on the brush motor support.
IP Cleaning S.p.A. - Viale Treviso, 63 30026 Summaga di Portogruaro - www.ipcworldwide.com
IP Cleaning S.p.A. - Viale Treviso, 63 30026 Summaga di Portogruaro - www.ipcworldwide.com
Tighten the adjustment screws.
•
Manually move the brush to the required position.
PLDC03834
PLDC03834
•
Tighten the adjustment screws.
IP Cleaning S.p.A. - Viale Treviso, 63 30026 Summaga di Portogruaro - www.ipcworldwide.com
IP Cleaning S.p.A. - Viale Treviso, 63 30026 Summaga di Portogruaro - www.ipcworldwide.com
Dustbane Products Ltd., 1000 Last Mile Dr., Ottawa, ON K1G 6Y1 • Tel: 1-800-387-8226 Fax: 1-800-363-5309 www.dustbane.ca
PLDC03834
PLDC03834
Daily maintenance:
Daily maintenance:
When you have finished cleaning,
When you have finished cleaning,
proceed as follows:
proceed as follows:
•
•
Turn the machine off.
Turn the machine off.
•
•
Activate the parking brake.
Activate the parking brake.
Daily maintenance:
Daily maintenance:
•
•
Raise the side brushes to prevent
Raise the side brushes to prevent
When you have finished cleaning,
When you have finished cleaning,
damage.
damage.
proceed as follows:
proceed as follows:
•
•
Recharge the batteries if
Recharge the batteries if
•
•
Turn the machine off.
Turn the machine off.
Daily maintenance:
necessary, using the connector
necessary, using the connector
•
•
Activate the parking brake.
Activate the parking brake.
When you have finished cleaning,
provided.
provided.
•
•
Raise the side brushes to prevent
Raise the side brushes to prevent
proceed as follows:
damage.
damage.
•
Turn the machine off.
•
•
Recharge the batteries if
Recharge the batteries if
Empty the debris bin
Empty the debris bin
•
Activate the parking brake.
necessary, using the connector
necessary, using the connector
•
Raise the side brushes to prevent
provided.
provided.
Check and remove any debris
Check and remove any debris
damage.
wrapped around the side brushes and
wrapped around the side brushes and
•
Recharge the batteries if
on the centre brush.
on the centre brush.
necessary, using the connector
Empty the debris bin
Empty the debris bin
provided.
Check and remove any debris
Check and remove any debris
wrapped around the side brushes and
wrapped around the side brushes and
Empty the debris bin
on the centre brush.
on the centre brush.
Check and remove any debris
wrapped around the side brushes and
on the centre brush.
1050 B-DP Quick Guide
1050 B-DP Quick Guide
Weekly maintenance:
Weekly maintenance:
1050 B-DP Quick Guide
Check the level of electrolyte in the
Check the level of electrolyte in the
batteries, if using acid batteries.
batteries, if using acid batteries.
Weekly maintenance:
Weekly maintenance:
WEEKLY MAINTENANCE
-
-
Check the level of electrolyte in the
Check the level of electrolyte in the
batteries, if using acid batteries.
batteries, if using acid batteries.
+
+
Check the level of electrolyte in the
Weekly maintenance:
+
+
batteries, if using acid batteries.
Check the level of electrolyte in the
-
-
-
-
batteries, if using acid batteries.
-
-
+
+
Battery
Battery
+
+
Check that the suction filter is tight
Check that the suction filter is tight
-
-
and clean.
and clean.
-
-
Battery
Battery
Check that the suction filter is tight
Check that the suction filter is tight
and clean.
and clean.
Battery
Check that the suction filter is tight
and clean.
-
-
+
+
-
-
+
+
-
-
+
+
+
+
-
-
+
+
+
+
+
-
-
+
+
-
+
-
-
+
2
2
2
2