Cazoner J1 Manual

Navegue en línea o descargue pdf Manual para Detectores de gas Cazoner J1. Cazoner J1 2 páginas. Natural gas detector

Imprimir página
CONTACT
Website: http://www.cazoner.com/
Tel: 86 15811801081
Address: A156 4F Niulanqian Building Longhua new District
Shenzhen, China.
Zip code: 518101
THANK YOU FOR READING :)
Product Introduction
1
CAZONER natural gas detector is a household detection
equipment for detecting the leakage of natural gas and
liquefied petroleum gas.When the gas leaks reach to the
concentration of dangerous value in the house, the signal
of the detector's audible and visual alarm will be issued
immediately that promoting you to take effective action
quickly to eliminate the danger so that can avoid the
accidents like fire and explosion effectively.
Sensor
Made with original cores
The gas-sensing electrodes material is
100% pure platinum precious metal.
Double alarm
Up to 70 dB audible alarm
360° ring warning light
Products Schematic
Installation Location
The detector and the gas stove should be located in the
same indoor space;
The best distance between the detector and the gas
leak source is 1-3 meters.
If the gas is natural gas,install the detector at the distance
of 0.3m from the ceiling and 1-3m from the gas source.
If the gas is LPG,install the detector at the distance of 0.3m
from the floor and 1-3m from the gas source.
Point for Attention
Do not install it in the place that too close to the gas
stove!
Do not install it in the place with too much smoke!
Do not install it in the place of exhaust fan,doors,
windows,bathrooms and other large airflow or humidity larger!
CAZONER Natural Gas Detector Manual
Arc Design
The detector is arc design that will be more design
sense and safer without sharp edge. Its line is
soft to add the visual space and could decorate
your indoor space naturally and gracefully.
The most important is that this design will keep the
detector high sensitive and stable in 7x24 hours.
The polycarbonate has been carefully selected
Strictly enforce fire safety standard requirements
Matte process.
Indicator State Description
Power indicator light on: Working normally
Green light flashes: Self-test and preload start up
Yellow light flashes: fault
Red light flashes: Danger Alarming
Installation Instructions
2
Key Function Operation Guide
3
Self-test Key:Detecting the sound and light alarm to
see if it is abnormal.
No alarm state-->Press the self-test button-->The ring
indicator light flashing green,red,yellow while the buzzer
sounds three
times.
If the ring indicator light or buzzer is abnormal,please
repair it in time.