CB2 ACACIA Manual de instrucciones de montaje - Página 2
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior CB2 ACACIA. CB2 ACACIA 7 páginas. Mini bar
También para CB2 ACACIA: Instrucciones de montaje (4 páginas), Instrucciones de montaje (4 páginas)
Imprimir página
acacia
MINI BAR
NOTE: Do not
over tighten the
bolts
bottom
panel
Attach 4 legs to bottom panel with 4 small bolts,
4 spring washers and 4 flat washers as shown.
Secure, but do not over tighten, bolts with an allen
1
wrench.
NOTE: Do not
over tighten the
cam screws
partition
Insert 4 wood dowels, 2 cams, and 1 cam screw
into partition and right side panel as shown.
Secure, but do not over tighten, cam screws with a
3
phillips head screwdriver.
Made in Vietnam - r08
small bolt
spring washer
flat washer
leg
right side
panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
bottom
crossbar
Insert 2 cams into bottom crossbar as shown.
Make sure arrows on each cam points toward
2
nearest edge with holes.
partition
NOTE: Make sure
plastic piece on
each crossbar face
up and bend towards
the back of assembly
as shown
Fit dowels of top/bottom crossbars into
corresponding holes of partition and right side
panel as shown. Using a screwdriver, turn each
cam clockwise until it securely engages each cam
4
screw.
NOTE: Make sure
arrows on each
cam points toward
nearest edge with
holes
top
crossbar
bottom
crossbar
right side
panel
Page 2 of 7