CB2 CADET Instrucciones de montaje - Página 4
Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior CB2 CADET. CB2 CADET 5 páginas. Wardrobe
También para CB2 CADET: Manual de instrucciones de montaje (6 páginas)
Imprimir página
cadet
CABINET
adjustable
B
shelf
A
A. With assistance of another adult, position unit
upright. Insert 8 shelf pins at desired shelf
heights.
B. Place 2 adjustable shelves into assembled
unit. Make sure shelves are securely supported by
9
each shelf pin.
B
NOTE: Doors can
be assembled to
left or right side
panel of assembled
unit
A) Attach hinges of each door onto the left or right
side panel of assembled unit. Secure each hinge
with 2 hinge screws.
B) Secure the set screws with a screwdriver as
shown. Refer to Hinge Adjustment diagram for
adjusting the alignment of the door hinges.
12
Assembly is now complete.
Made in Thailand - r04
A
A
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A
B
bumper
C
pull
A. Fit 2 hinges into corresponding holes of 2
doors as shown. Secure each hinge with 2 hinge
screws, using a screwdriver.
C. Adhere 2 bumpers to each door as shown.
B. Attach 1 pull to each door with 2 pull bolts,
10
using a screwdriver.
hinge adjustment
If the doors do not appear square or aligned, loosen or
tighten the appropriate screws on each case hinge as
illustrated.
A
B
1
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
C
C
3
hinge
door
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
A
B
2
3) Height adjustment:
Loosen screw C, adjust
door height and re-
tighten screw C.
Page 4 of 5