CB2 FUEL Instrucciones de montaje - Página 4

Navegue en línea o descargue pdf Instrucciones de montaje para Mobiliario interior CB2 FUEL. CB2 FUEL 5 páginas. Credenza

fuel

CREDENZA

left door

front

A. Attach hinges of left and right door to left and

right side panels as shown. Secure each hinge

with 4 small screws.

B. Secure the set screws with a screwdriver as

shown. Refer to Hinge Adjustment diagram for

adjusting the alignment of the door hinges.

Assembly is now complete.

If the doors do not appear square or aligned, loosen or

tighten the appropriate screws on each case hinge as

illustrated.

1) Side to side adjustment:

Loosen screw A, adjust gap

with screw B and re-tighten

screw A.

Made in Vietnam - r06

right door

front

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do

not use abrasive cleaners. Do not use furniture wax

or polish as the unit is finished with a protective

clear lacquer. It is recommended to use coasters to

protect surface from heat and water.

This credenza is rated to support 50 lbs, evenly

distributed.

2) Depth adjustment:

Loosen screw A, push hinge arm

forwards or backwards, re-tighten

screw A and secure screw B with

a 1/4 turn clockwise.

3) Height adjustment:

Loosen screw C, adjust

door height and re-

tighten screw C.

Page 4 of 5