Datalogic S70 Manual de inicio rápido
Navegue en línea o descargue pdf Manual de inicio rápido para Accesorios Datalogic S70. Datalogic S70 10 páginas. Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies
También para Datalogic S70: Manual (18 páginas)
Imprimir página
For complete technical information about this product, including dimensions, accessories, and specifications, see www.datalogic.com.
WARNING: Not to be used for personnel protection
Never use this device as a sensing device for personnel protection.
Doing so could lead to serious injury or death. This device does not include the self-checking redundant circuitry
necessary to allow its use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
Model
S70-5-E3-PV/NV
S70-5-E3-PI/NI
1
NOTE: Maximum sensing range in opposed mode at 12 ms response speed using 1mm diameter core plastic fiber.
CONNECTIONS
NPN Version
1
3
A_Out
2
LOAD
D_Out
4
LOAD
NOTE: Open lead wires must be connected to a terminal block.
S70 Analogue Output
Advanced sensor with dual digital displays
for use with plastic and glass fiber optic assemblies
Figure 1
Sensing Beam Color Reference Sensing Range
Visible Red
+
10-30 VDC (Current models)
12-30 VDC (Voltage models)
Input wire
1
2
3
4
5
6
7
1
Outputs
Voltage and PNP or
Discrete
2250 mm
Current and PNP or
Discrete
PNP Version
1
10-30 VDC (Current models)
3
12-30 VDC (Voltage models)
A_Out
2
LOAD
D_Out
4
LOAD
Input wire
1
Analogue and Discrete Output LEDs
CH1/CH2 Switch
RUN/PRG/ADJ Mode Switch
Lever Action Fiber Clamp
Red Signal Level
Green CH1 Analog Output
Signal or CH2 Threshold
+/SET/- Navigation key
Connector
NPN
4-pin,
M8 Pico-style
NPN
Key
1 = Brown
+
2 = White
3 = Blue
4 = Black