Datalogic S70-E1 Manual

Navegue en línea o descargue pdf Manual para Accesorios Datalogic S70-E1. Datalogic S70-E1 18 páginas. Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies

Imprimir página

For complete technical information about this product, including dimensions, accessories, and specifications, see www.datalogic.com.

WARNING: Not to be used for personnel protection

Never use this device as a sensing device for personnel protection.

Doing so could lead to serious injury or death. This device does not include the self-checking redundant

circuitry necessary to allow its use in personnel safety applications.

A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.

S70-2-E1-N

S70-2-E1-P

S70-5-E1-N

S70-5-E1-P

S70-5-E1-PZ

S70-5-E2-N

S70-5-E2-P

CONNECTIONS

NPN Version

LOAD

Load

IO-Link Version

(C/Q)

Load

(Q)

Load

NOTE: Open lead wires must be connected to a terminal block.

A model with a QD connector requires a mating cordset.

S70 Series

Advanced sensor with dual digital displays

for use with plastic and glass fiber optic assemblies

Figure 1

Outputs

Single NPN

Single PNP

Single NPN

Single PNP

Dual outputs, 1 push-pull IO-Link and 1 PNP

(complementary outputs)

Single NPN

Single PNP

10-30 VDC

Remote

Programming (N.O.)

18-30 VDC

2 m cable, 4-wire

Integral M8 Pico QD connector, 4-pin

PNP Version

10-30 VDC

LOAD

Load

Remote

Programming (N.O.)

Output LED

LO/DO Switch

RUN/PRG/ADJ Mode Switch

Lever Action Fiber Clamp

Red Signal Level

Green Threshold

+/SET/- Navigation key

Connector

Key

1 = Brown

2 = White

3 = Blue

4 = Black

Pico