Dustie DK2 Manual - Página 6

Navegue en línea o descargue pdf Manual para Limpiador de aire Dustie DK2. Dustie DK2 20 páginas.

I. Product Operation

1. Place the machine on the horizontal desktop and make sure

to follow the precautions on the first page.

2. Plug in the power

Plug the purifier power cord into a power socket with a voltage of 220V and a

frequency of 50Hz, and ensure good contact.

Note: Do not plug or unplug with wet hands to avoid electric shock.Unplug the power

cord when moving the machine.

3. On/off

Press and hold the power button for 3 seconds, the power indicator light is on, the

product is turned on; press again and hold for 3 seconds, the product is turned off.

4. Wind speed

Touch the power button to switch the product wind speed. Each time you touch the

button, the wind speed will shift into a higher gear, and the corresponding indicator

lights up; and so on; the default gear is gear I.

5. Ambient light on/off

Tap the power button twice to turn the ambient light on or off.Each time the power is

turned on, the ambient light is default to "on".

6. Filter replacement/reset

When the filter usage expires, the product will automatically enter the filter warning

mode. At this time, the red light at the top of the product will light up and flash, and the

motor will stop rotating, indicating that you need to replace the filter to prevent the used

old filter from affecting your health.

(Reset method: Press and hold the power button, and unplug the power plug and plug

it in again to release the filter warning mode.)

Operating instructions